Why do all stations not turn on my Orbit 57936 Timer?
If all stations on your Orbit Timer aren't turning on, it could be due to several reasons. First, the transformer might be defective or not correctly connected. Second, the programming could be incorrect. Finally, ensure that the timer is not in OFF mode.
What to do if my Orbit 57936 will not power up?
If your Orbit Timer won't power up, the issue could stem from a defective or incorrectly connected transformer. Also, check that the transformer is plugged into a working AC outlet and that the timer is fully seated on the docking port.
Why do stations turn on when they are not supposed to on my Orbit Timer?
If stations on your Orbit Timer are turning on when they shouldn't, it might be because the water pressure is too high. Also, check if more than one cycle is programmed or if stations are set to water with both programs.
Why do stations continue to turn on and off when they are not programmed to on my Orbit Timer?
If stations on your Orbit Timer continue to turn on and off when they are not programmed to, it could be due to multiple cycles being programmed, excessive pressure, stations being set to water with both programs, or water budgeting being set to more than 100%.
What causes a persistent fault on my Orbit Timer?
A persistent fault on your Orbit Timer may be due to a short in the wiring or solenoids.
Overview of PC programmability, dual programs, stacking, docking port, remote control, and LCD.
Explains multi-language support, water budgeting, and optional rain sensor integration.
Guides on setting language, current time, date, and planning the watering schedule.
Covers program toggling, setting watering days, start times, and station durations.
Instructions for watering all or specific stations using the remote control.
Steps to synchronize the remote control device with the timer for proper function.
Criteria for selecting an installation location and mounting the docking port.
Instructions for connecting the transformer and sprinkler valve wires to the timer.
Steps for mounting the sleeve for the remote control device.
Explains Smart-Scan fault detection for solenoids, wiring, and pump/master valve faults.
Details the auto-resetting circuit breaker, causes for tripping, and steps to correct faults.
Addresses issues like stations not turning on, unexpected cycling, or timer power failures.
General| Delay Watering | Yes |
|---|---|
| Manual Watering | Yes |
| Number of Stations | 1 |
| Power Source | Battery |
| Hose Connection Size | 3/4 inch |
| Material | Plastic |
| Dimensions | 5.5 x 3.5 x 2.5 inches |
| Battery Type | AA (2) |
| Color | Black |
| Watering Duration | 1 min to 4 hours |
To Next Page