Orbit 57936 - Programming Your Timer; Program and Station Settings

5
ENGLISH
Section 2: Getting Started
Set Language
• Press the RESET button. The controller will now take you
through a step by step programming process.
• Press or on the touch screen to set the language of your
choice (English, Spanish, French, German or Italian).
• Press ENTER.
Set Current Time and Date
• Press or to set the current time. Press ENTER.
• Press or to set the current year. Press ENTER.
• Press or to set the current month. Press ENTER.
• Press or to set the current day of the month.
Press ENTER.
Determine a Watering Plan
See page 14 for instructions.
Section 3: Programming Your Timer
Walk through programming is available after hitting the
RESET button.
Program Toggle Feature
The Program Toggle Feature allows you to switch back and
forth between Program A and Program B. Press PROG. A
q
B
on the touch screen to select Program A (“A” is larger than “B”)
or Press PROG. A
q
B on the touch screen to select Program B
(“B” is larger than “A”). You can change the watering start times,
watering days, and watering durations for each program.
Set Start Times
• Press or to set the start time for the selected program.
Press ENTER.
Set Watering Days
• Press ODD, EVEN, INTERVAL (1-32 days using or )
or the specific days of the week (Su, Mo, Tu, We, Th, Fr, Sa)
you want the selected program to water. Press ENTER.
Set Station Watering Durations
• Select the first station to be watered by pressing the station
number on the bottom of the touch screen or press ENTER
to advance to the desired station. Note: The active station,
being programed, will Flash.
• Set the watering duration for each station by either:
1. Selecting one of the preset watering duration minutes
(0, 5, 10, 15, 20, 30 or 45) on the bottom of the LCD.
2. Using the or to enter the desired minutes.
Note: a watering duration must be entered for each watering station.
• Follow the same procedure to set the watering durations for
all other stations.
• Press EXIT.
At this point you will see the PROGRAMMING COMPLETE screen.
If you wish to go back and change any of the settings, press BACK. If
not, press ENTER. This will accept the programming and take you to
the HOME/AUTO screen.
SET START TIME
12:00AM
ENTER
BACK
PROG.
B
A
Figure 3: Set Start Times
PROG.
B
A
PROG.
A
B
Figure 2: Program Toggle Feature
Figure 4: Set Watering Days
SET
ENTER
BACK
PROG.
B
A
ODD
Su Mo Tu We Th Fr Sa
EVEN
INTERVAL
WATERING DAYS
07WTM004225 57932-24 rE.indd 5 5/2/07 4:39:23 PM