D
Diane HoffmanAug 2, 2025
Why all valves do not turn on Orbit 94874 Timer?
- Ggerald18Aug 2, 2025
If all valves on your Orbit Timer fail to turn on, it could be due to a defective or disconnected transformer, or incorrect programming.
To Next PageTo Next PageWhy all valves do not turn on Orbit 94874 Timer?
If all valves on your Orbit Timer fail to turn on, it could be due to a defective or disconnected transformer, or incorrect programming.
Why do stations turn on when they are not supposed to on my Orbit 94874?
If stations turn on unexpectedly with your Orbit Timer, it could be due to several reasons. The water pressure might be too high, or there could be more than one start time programmed. Also, check if the AM/PM settings are incorrect or if the B program is activated.
Why one or more valves do not turn on Orbit 94874?
If one or more valves do not turn on with your Orbit Timer, it could be due to a faulty solenoid connection, damaged or severed wire, the flow control stem being screwed down and shutting the valve off, or incorrect programming.
Guide on choosing the optimal placement for the timer.
Instructions for physically attaching the timer to a wall.
Steps for wiring the sprinkler valves to the timer.
Procedure for setting the current time on the timer.
Instructions for configuring the current date.
How to define the beginning time for watering cycles.
Setting the duration each station will water.
Configuring the watering frequency (days, intervals, odd/even).
How to temporarily suspend watering due to weather.
Guide to manually activate watering cycles.
Instructions for attaching an external rain sensor.
Explanation of the switch to override the rain sensor.
General