To Next PageTo Next Page
Need help?Do you have a question about the Orbit 94881 and is the answer not in the manual?
General| Delay Start | Yes |
|---|---|
| Manual Watering | Yes |
| Type | Digital |
| Number of Outlets | 1 |
| Watering Duration | 1 minute to 4 hours |
Discusses timer features like dual programs, fail-safe operation, water budgeting, and start-time stacking.
Instructions for replacing the CR2032 lithium battery to retain program memory.
Procedure to press the recessed RESET button for initial programming.
Step-by-step guide to setting the current time and date on the timer display.
Details on using Program A to select watering days or every second day.
Details on using Program B for interval or odd/even day watering schedules.
Instructions for setting up watering schedules based on specific days of the week.
How to input the initial start times for watering programs.
Steps to define how long each station will water.
How to input the initial start times for Program B.
Steps to prepare the timer for automatic watering after programming is complete.
Instructions for manually advancing watering stations or turning the timer off.
How to activate a temporary delay (24, 48, 72 hrs) for scheduled watering.
Features for adjusting watering duration percentages and setting multiple daily start times.
How to run all stations from both Program A and B sequentially.
How to manually run stations from only Program A or only Program B.
How to manually set specific watering durations for individual stations.
An overview of the five main steps for installing the sprinkler timer.
Criteria for choosing a suitable location for the sprinkler timer.
Instructions on how to physically mount the timer to a wall.
Guidance on installing the battery for memory retention during power loss.
Steps for connecting the sprinkler timer to the irrigation valves.
Detailed instructions for connecting valve wires to the timer terminals.
Instructions for connecting the timer to an AC power source.
Guidance on using a junction box for permanent electrical connections.
Specific steps for wiring a rain sensor to the timer.
Explanation of the sensor override switch for maintenance.
How to connect pump start relays or master valves to the timer.
Details about the fuse type and rating for circuit protection.
Lists common issues like valves not turning on and their potential causes.
Contact information for Orbit Technical Service and product support.
Details regarding product warranty, listings, and trademarks.
Information on FCC compliance, warnings against modifications, and interference.
