Orbit ST 35D User Manual

9
1.5.3 “MODE” BUTTON
When treadmill is switched on, press this button to choose countdown modes:‖H-1‖,‖H-2‖,‖H-3‖;
H-1‖ is the time countdown mode, ―H-2‖ is the distance countdown mode, ―H-3‖ is the calorie countdown
mode;
press ―SPEED+/-‖ or ―INCLINE+/-―button to adjust the set values to desired values. After that, press ―START‖
button to start the treadmill.
1.5.4 “SPEED +/- “BUTTON
SPEED +/– --Adjust speed when treadmill starts, the increment is 0.1km with each press. Hold on
button for continuous adjustment.
1.5.5 SPEED QUICK BUTTON
Press speed quick button 4km/h，6km/h，8km/h, 10km/h, 12km/h , 16km/h, 18km/h to adjust speed
towards the desired speed when the treadmill is running.
1.5.6 “INCLINE+/-” BUTTON
INCLINE +/ – --Adjust incline when treadmill starts; the increment is 1% with each press. Hold on
button for continuous adjustment.
1.5.7 INCLINE QUICK BUTTON
Press incline quick button 2,4,6,8,10,12,15 to adjust incline towards desired level when the treadmill is
running
1.6. DISPLAY FUNCTION
1.6.1 SPEED
Display running speed in km/h
1.6.2 TIME
Display total accumulated running time or countdown time left in a program
1.6.3 DISTANCE
Display accumulated total distance or distance countdown.
1.6.4 CALORIE
Display accumulated calorie burnt or calorie countdown
1.6.5 INCLINE
Display incline level in 15 increments
1.6.6 PULSE
Display pulse data

Orbit ST 35D Specifications

General

Brand	Orbit
Model	ST 35D
Category	Treadmill
Language	English