To Next PageTo Next Page
Need help?Do you have a question about the ORCATORCH D570 and is the answer not in the manual?
Overview of the Orca Torch D570 dive light, highlighting its dual light sources.
Key features including dual light sources, side switch, battery indicator, and robust construction.
Detailed specifications for white beam and laser, including output, runtime, intensity, distance, waterproof rating.
Instructions for mode selection, battery indication, and overheat protection.
Step-by-step guide for correctly inserting and replacing the battery.
Guidelines for cleaning, protecting, and maintaining the flashlight's performance.
Details on warranty coverage, including 30-day replacement and 12-month repair.
Crucial safety warning about the high intensity of the lighting device.
The Orca Torch D570 is a versatile dive light designed for both recreational and commercial diving, offering a powerful 1500 lumens of white light and an additional laser light function. This dual-light system allows users to switch between the two light sources independently, catering to various underwater scenarios and preferences. The device features a convenient side switch that not only controls the light modes but also includes a battery indicator, providing real-time information about the remaining power level.
One of the key usage features of the D570 is its intuitive mode selection. To activate the laser light, users simply press the side switch, and releasing it turns the laser off. For the white light, a quick double-click of the side switch will turn it on, and another double-click will turn it off. This independent control over the two light sources enhances flexibility during dives. The integrated battery indicator is a crucial feature, displaying the battery level when the white light mode is active. A green light signifies over 70% charge, orange indicates 30%-70%, red means 10%-30%, and a flashing red light warns of less than 10% charge remaining. This clear visual feedback helps divers manage their power consumption effectively.
The D570 is also equipped with an intelligent Over-Heat protection system. While primarily designed for underwater use, where water helps dissipate heat, the torch can get hot if used on land for extended periods. To prevent damage from overheating, the device will automatically reduce its output if its temperature reaches 65 degrees Celsius. This ensures the longevity and reliability of the light. Furthermore, the total runtime of the light can be significantly extended if it is used discontinuously, allowing for longer periods of use across multiple dives or tasks.
Battery replacement is straightforward, requiring users to insert the battery with the anode side (+) facing the light head. It is crucial to avoid reversing the battery, as this can damage both the flashlight and the battery itself. Users are also advised against using batteries with a higher voltage than the flashlight's working voltage or batteries with damaged surfaces or deformations, as these can lead to short circuits, explosions, or leakage. The device supports USB Type-C charging for convenience.
For maintenance, it is recommended to clean the surface of the light with fresh water and wipe it dry after each use, especially after exposure to seawater, to prevent corrosion. Users should also avoid dropping or placing the light on sand, as iron sand can stick to or enter the switch section or screw threads, potentially impairing functionality. Before going underwater, all connections of the light should be tightened securely to ensure water resistance. After each dive, the batteries should be removed. It is important not to disassemble the sealed head, as doing so can damage the flashlight and void the warranty.
The use of high-quality batteries is recommended, and if the flashlight will not be used for a long time, the batteries should be removed to prevent damage from electrolyte leakage or battery explosion. The O-rings should be replaced if they are damaged after prolonged use and regularly lubricated with silicon grease to maintain the flashlight's waterproof seal. Periodically cleaning the light's contacts is also important, especially if the light flickers or fails to turn on. Common reasons for flickering or non-working lights include depleted batteries (which should be replaced, ensuring correct polarity) or dirty threads, PCB board contacts, or other contacts (which can be cleaned with an alcohol-soaked cotton swab). If these steps do not resolve the issue, users should contact distributors and refer to the warranty policy.
General| Battery Capacity | 3400mAh |
|---|---|
| Color Temperature | 6500K |
| Beam Angle | 8 degrees |
| Battery Type | 18650 Li-ion battery |
| Water Resistance | 150m underwater |
| LED | CREE XM-L2(U4) |
| Modes | High, Medium, Low, Strobe |
| Battery | 1 x 18650 battery |
| Light Source | 1 x Cree XM-L2(U4) LED |
| Material | Aircraft-grade aluminum |
