To Next PageTo Next Page
Need help?Do you have a question about the Orcon HRC 300 4B P and is the answer not in the manual?
General description of the Orcon HRC heat recovery unit and its control system.
Concise steps for installing the heat recovery unit, including mounting and connections.
Instructions for fitting the unit's mounting frame to the wall.
Crucial safety and regulatory requirements for installing the HRC unit.
Guidance on connecting air ducts to the unit, including insulation.
Details on connecting the condensate drain trap and pipework.
Installing the heat recovery module, cover, and electrical connections.
Setting up speed control and configuring unit orientation and airflow.
Instructions for periodic filter cleaning by the user.
Periodic cleaning of the heat exchanger and fans by an installer.
Procedures for mounting the heat exchanger and motor plates after servicing.
Understanding the meaning of various LED signals and fault indications.
Electrical wiring diagrams for BP and BRH models of the HRC unit.
Technical data and specifications for the HRC 300 model.
Graphical representation of fan performance and power consumption for HRC 300.
Technical data and specifications for the HRC 400 model.
Graphical representation of fan performance and power consumption for HRC 400.
Instructions for pairing and managing wireless remote controls with the unit.
Guide to replacing the remote battery and understanding remote controls.
Illustrated breakdown of the unit with article codes for ordering replacement parts.
General| Maximum air flow | 300 m³/h |
|---|---|
| Frost protection | Yes |
| Type | Heat recovery ventilation |
| Mounting | Wall-mounted |
| Bypass | Automatic |
| Heating Capacity | Not applicable |
| Fuel Type | Not applicable |
| Operating Pressure | Not applicable |
