OREC RABBIT RM60W User Manual

OREC RM60W
5
 When stopping the work, stop the engine and put on the handbrake before leaving
the mower.
 Engage all the safety equipments.
 Move the controls only when the operator is correctly seat down in the operator seat
 Visually check hydraulic leaks and if some parts are faulty or missing. Repair before
use.
 A hydraulic oil jet due to a leak can penetrate under the skin causing serious injuries.
In this case you must immediately consult a doctor.
 Never change the adjusment of the safety valve, it is set in the factory. Unsetting
this valve would cause failures.
 Ensure that the user of the machine has already read and understood this manual
and that he is aware of all the safety instructions before any use.
 Always use a chuck and bronze hammer when replacing or intervening on the pins
and bolts at the end of rams, rod … etc in order to avoid the projection of metal
fragments

OREC RABBIT RM60W Specifications

General

Brand	OREC
Model	RABBIT RM60W
Category	Farm Equipment
Language	English