Oreck Air Response WK16002 User Manual

1
1
2
2
3
3
4
Remove cover Remove & replace with
new Odor filter
After filter is replaced,
press indicator light for
4 seconds to reset.
Icon will disappear.
Replace cover
Replacing the Odor Filter
Clean dust sensor every time a
filter is replaced by gently wiping
clean with a cotton swab. This will
help ensure the air purifier
continues to operate at maximum
performance.
Dust Sensor is located
on the right side of the unit.
Remove cover
Remove & replace with
new HEPA Media filter Replace cover
Remove any plastic coverings
from new filter(s) before installing.
After filter is replaced,
press indicator light for
4 seconds to reset.
Icon will disappear.
Replacing the HEPA Media Filter
Odor and HEPA Media filters may not need to be replaced at the same time.
Replace according to indicator light.
CAUTION! TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CLEANING AND SERVICING. IMPORTANT! THE FILTERS ARE NOT WASHABLE.
8

Oreck Air Response WK16002 Specifications

General

Brand	Oreck
Model	Air Response WK16002
Category	Air Cleaner
Language	English