Why is my Oreck Air Cleaner so noisy?
A high noise level in your Oreck Air Cleaner could be due to a dirty HEPA filter. Check the HEPA filter and replace it if needed. Also, if you have recently replaced the filter, ensure that all plastic packaging has been removed before inserting it into the unit.
What to do if my Oreck Air Cleaner doesn't turn on?
If your Oreck Air Cleaner isn't turning on, first, ensure the power cord is properly plugged into an outlet. Second, check that the Selector Switch is set to your desired blower speed.
Provides essential safety guidelines and warnings for operating the air purifier.
Details the HEPA/Odor Filter, air intake, and exhaust grille for air cleaning.
Explains motor speed, power, timer, Air Revitalizer, and remote control functions.
Instructions for placing, plugging in, and turning on the air purifier.
Guide on how to select the desired air cleaning speed.
Step-by-step guide for removing and replacing the HEPA and Odor filter.
Lists the part number for the HEPA filter, 2 pack.
Troubleshooting steps for when the unit fails to power on.
Solutions for excessive noise emanating from the air purifier.
General troubleshooting for persistent operational issues and service contact.
General| Filter Type | HEPA |
|---|---|
| Model Number | AIRH1Q2PK |
| Noise Level | 25 dB (Low), 51 dB (High) |
| Dimensions | 12.75 x 7.5 x 19.25 inches |
| Weight | 11.4 lbs |
| Power Consumption | 50W |
To Next Page