What to do if my Oreck AIRP Air Cleaner is sparking, crackling, and popping?
Sparking or popping noises in your Oreck Air Cleaner can occur when dust particles build up in the Truman Cell™. Gently wipe the cell wires with a dry cotton swab, or clean the entire cell with Assail-a-Cell or soapy water. If excessive arcing continues after cleaning, the cell may be damaged or wet; if damaged contact Oreck for service.
How to fix an Oreck AIRP that does not turn on?
If your Oreck Air Cleaner doesn't turn on: 1. Ensure the power cord is properly plugged in. 2. Set the power button to your desired blower speed. 3. Reinsert the front grill, sliding it to the right until it locks into place. 4. Make sure the top cover is replaced and slid back to lock.
How to fix an Oreck AIRP that does not remove pollutants?
If your Oreck Air Cleaner isn't removing pollutants, the Truman Cell™ may need cleaning. Wash the Truman Cell™ and make sure it is thoroughly clean and dry before reinstalling it.
What to do if my Oreck AIRP Air Cleaner does not remove odor?
If your Oreck Air Cleaner isn't removing odors, vacuum the odor absorber with a soft brush attachment if it's dirty, but do not use any liquids to clean it. You can also replace the odor absorber if desired.
Why does my Oreck Air Cleaner spark, crackle, and pop?
Sparking, crackling, and popping noises in your Oreck Air Cleaner usually occur when a large particle is captured in the collector cell. If the unit is arcing excessively, the collector cell may be dirty, so try cleaning it. If the excessive arcing continues after cleaning, the cell may be damaged or wet; if damaged, contact Oreck for service.
How to fix an Oreck AIRP Air Cleaner that won't turn on?
If your Oreck Air Cleaner isn't turning on, make sure the power cord is properly plugged in. Also, ensure that the power button is set for the desired blower speed. Check that the front grill is correctly reinserted, sliding to the right until it locks. Finally, verify the top cover is replaced and slid back to lock.
How to improve odor removal with my Oreck AIRP Air Cleaner?
If your Oreck Air Cleaner isn't removing odors, try vacuuming the odor absorber with a soft brush attachment if it's dirty. Do not use any liquids to clean it. You can also replace the odor absorber if desired.
Why is the 'Check Collector Cell' light red on my Oreck AIRP?
The 'Check Collector Cell' light turns red on your Oreck Air Cleaner when the Truman Cell™ needs cleaning. Ensure the Truman Cell™ is thoroughly clean and dry before reinstalling it. After cleaning, hold down the Air Revitalizer button until the light blinks three times to reset the timer.
Why is the 'Check Collector Cell' light flashing red on my Oreck AIRP?
The 'Check Collector Cell' light flashes red on your Oreck Air Cleaner because the Truman Cell™ may need cleaning, may not be completely dry, or may be damaged. Clean the Truman Cell™. If you have already cleaned it, allow it to air dry longer. If the problem persists, contact Oreck for service, as the Truman Cell™ may be damaged.
Why is the 'Check Odor Absorber' light red on my Oreck AIRP?
The 'Check Odor Absorber' light turns red on your Oreck Air Cleaner when the odor absorber needs attention. Hold down the Night Light button until the light blinks three times to reset the Check Odor Absorber timer after replacing the odor absorber. If you don't want to replace it, remove the old odor absorber to turn off the light.
General| Model | AIRP Series |
|---|---|
| Filter Type | HEPA Filter |
| Noise Level | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
Crucial safety instructions and warnings for operating the air purifier to prevent hazards like electric shock or fire.
List of optional accessories for the air purifier, including cleaners and scent cartridges.
Details on essential replacement parts like pre-filters and collector cells, with part numbers.
Overview of air purifier components (collector cell, pre-filter) and status indicator lights (collector cell, odor absorber).
Guide to operating controls like speed, air direction, and using features like the Air Revitalizer and Night Light.
Recommended cleaning intervals, methods for the pre-filter, and general cabinet cleaning.
Detailed instructions for cleaning the collector cell, including using Oreck Assail-a-Cell cleaner.
Procedures for cleaning the air direction grill and oxygenator, and replacing the odor absorber.
A guide to diagnosing and resolving common issues with the air purifier, such as unit not turning on or indicator lights.
To Next Page
