What to do if my Oreck Air Cleaner does not turn on?
If your Oreck Air Cleaner isn't turning on, ensure that the power cord is properly plugged into an outlet. Also, check that the cover is securely closed.
What to do if my Oreck AirInstinct AIR108 does not capture particles?
If your Oreck Air Cleaner is not capturing particles, you should inspect the filters and replace them if needed. If the problem persists, the unit may be damaged, and you should contact Oreck for service.
Why the airflow speed is weak on my Oreck AirInstinct AIR108?
If the airflow speed of your Oreck Air Cleaner is weak, start by checking the filters and replace them if necessary. Also, make sure that the plastic bags were removed from the filters.
Why my Oreck AirInstinct AIR108 Air Cleaner is not providing air?
If your Oreck Air Cleaner is not providing air, ensure that the power cord is plugged in. If it is, press and hold the POWER button to turn the unit on.
Important safety instructions for operation, cord usage, and electrical precautions.
Guidelines for safe placement of the air purifier, avoiding hazardous environments and ensuring airflow.
Explains how to manually select fan speed and utilize silent mode for quiet operation.
Describes automatic fan speed adjustment based on air quality and the sleep mode function.
Chart detailing recommended cleaning frequency and methods for various parts of the unit.
Step-by-step instructions for removing and installing the pre-filter, A3™ filter, and HEPA filter.
Procedures for resetting the filter indicator light after filter replacement.
Detailed guide on cleaning the air sensor lens and surrounding areas for accurate readings.
Instructions on modifying the air sensor's sensitivity settings for Auto Mode.
General| Model Number | AIR108 |
|---|---|
| Activated Carbon Filter | Yes |
| Pre-filter | Yes |
| Number of Fan Speeds | 3 |
| Sleep Mode | Yes |
| Product Type | Air Purifier |
| Filter Type | HEPA |
| Room Size | Medium |
To Next Page