Why is my Oreck AIRH1Q Air Cleaner so loud?
If your Oreck Air Cleaner is making too much noise, it might be due to a dirty HEPA filter. Try replacing the HEPA filter. If you've just replaced the filter, ensure you've removed all plastic packaging before inserting it into the unit.
General| Brand | Oreck |
|---|---|
| Model | AIRH1Q Series |
| Category | Air Cleaner |
| Language | English |
Provides essential safety guidelines and warnings for operating the air purifier.
Activates continuous air freshness via negative ion release.
Captures 99.97% of particles and reduces odors.
Directs the flow of air as it exits the unit.
Allows selection of low, medium, or high fan speeds.
Button to turn the unit ON and OFF.
Where air enters the unit for the first stage of cleaning.
Sets the run time from one up to twelve hours.
Remotely controls power, Air Revitalizer, speed, and timer.
Locate the air purifier on a hard surface with unobstructed airflow.
Plug into a standard electrical outlet that accepts a polarized plug.
Push the ON/OFF button to turn the unit on.
Press the SPEED button to choose the desired air cleaning speed.
Step-by-step guide to replacing the unit's filter.
Identifies the part number for the HEPA filter replacement.
To Next Page
