Oreck AIRH1Q Series - Troubleshooting Guide

9
Part Number
HEPA filter, 2 pack AIRHEPA2PKQ1
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
Trouble
Shoot
Problem Check Solution
Unit does not turn
ON
• Power Cord
• Selector Switch
• Plug in Power Cord
• Set Selector Switch
for desired blower
speed.
Unit has high
noise level.
• Check for dirty
HEPA Filter
• New filter
• Replace HEPA filter
if desired.
• Make sure plastic is
removed from new
filter before inserting.
Unit still does not
operate properly.
Check all the above
points.
Contact Oreck for
service.
1-800-989-3535