Oreck AirInstinct AIR108 - Filter Reset Mode

13
Filter Reset Mode
1. The indicator light will blink when a lter may need to
be replaced.
*
2. When the indicator light blinks, press the Mood Button
to nd out which lter needs to be replaced:
3. Using a small enough tool to t through the air inlets,
press the small black reset button located behind the air
inlet/outlets.
*
Filter life will vary by usage and environment.
Low Speed Light
Indicates HEPA Filter is in need of replacement.
Medium Speed Light
Indicates A3
™
Filter is in need of replacement.
1
3
2