Oreck AirInstinct AIR108 User Manual

9
Manual Mode
A. Press the SPEED button for the desired fan speed: Low,
Medium, High, Turbo.
B. The indicator lights will show the speed. All three lights
will be illuminated in Turbo Mode.
C. Silent Mode: Press the Silent button to for the lowest and
most quiet speed. Note: this speed is only available in the
manual mode.
Automatic (AUTO) Mode
Important: The Air Sensor is set to standard sensitivity when
shipped from the factory. If you prefer the air purier to
adjust its speed more or less frequently, you can adjust the
sensitivity of the Air Sensor (see page 15).
A. PresstheAUTOOn/Offbuttontosetthepurierinauto-
maticmode.Inautomaticmodetheairpurierwillself
adjust the fan speed.
B. The indicator lights will show the speed.
C. Sleep Mode: If the environment is dark for longer than
three minutes in Auto Mode, the unit automatically
switchestosleepmode,loweringtheairowspeed,noise
and electricity consumption. If the environment
brightensagainforlongerthanveminutestheunit
resumes normal operation. Note: This mode is only
available in Auto Mode. In sleep mode all displays
except the power indicator are turned off.
A
C
B
BC
A

Oreck AirInstinct AIR108 Specifications

General

Brand	Oreck
Model	AirInstinct AIR108
Category	Air Cleaner
Language	English