What to do if my Oreck ProShield Plus Ai Air Cleaner does not turn ON?
If your Oreck Air Cleaner isn't turning on, make sure the power cord is properly plugged in. Also, verify that the selector switch is set to your desired blower speed.
General| Product Type | Air Cleaner |
|---|---|
| Filtration System | HEPA |
| Filter Replacement Indicator | Yes |
| Number of Fan Speeds | 3 |
| Air Changes per Hour | 5 |
| Technology | HEPA |
| Room Size | Large Room |
Crucial safety instructions for operating the air purifier, covering electrical hazards and physical risks.
Recommendations for safe and effective placement, avoiding hazardous environments and improper use.
Explains the Air Revitalizer feature for air freshness and its potential impact on dust.
Details the HEPA filter's effectiveness in removing airborne particles for cleaner air.
Describes the Speed Indicator, Motor Speed/Power Button, and Air Intake.
Outlines the functions available through the remote control for operating the unit.
Steps for locating the air purifier on a stable surface and plugging it into an electrical outlet.
Guide on how to choose the desired air cleaning speed using the motor speed/power button.
Step-by-step instructions for safely removing and replacing the HEPA filter.
Provides the part number for the HEPA filter, indicating it is available in a 3-pack.
Steps to resolve issues where the unit does not power on, focusing on the power cord and switch.
Guidance for addressing excessive noise, often related to a dirty HEPA filter.
Advice for persistent operational issues, recommending checks and contacting customer service.
Details the manufacturer's limited warranty, including coverage, exclusions, and conditions for residential use.
To Next Page