To Next Page
G
gary87Jul 30, 2025
What to do if Oreck STEAM-IT STEAM100 emits no steam?
- PPatricia GrahamJul 30, 2025
If no steam is emitted when your Oreck Steam Cleaner is on, the water tank may be empty, so fill the water tank. Another possible cause is that the steam switch is not activated properly, despite the green light. In this case, press down the steam switch fully. Also, the weighted tube inside the tank may not be in the correct (immersed) position; try shaking the steam cleaner gently. If the power cable is damaged you should contact Oreck for service. In case the steam nozzle is blocked see 'Unblocking the Steam Outlet'.
General
