Oregon Scientific ATC2K - Connecting to a Computer; Playing Back Video Footage on a TV

23
24
IX) Connecting to a computer
You can upload your recorded video footage to a PC by
connecting the ATC2K to the PC. Connect your camera
to your PC using the USB cable.
1. Turn the ATC2K on.
2. Connect the ATC2K to a PC via the USB cable.
3. “F” appears on the ATC2K LCD screen, which means
ATC2K is connected to your PC.
4. The ATC2K drive appears in the [My Computer] folder.
*If you are connecting the camera to a PC for the first time, the required
driver is installed automatically so that the camera can be recognized by
Windows Plug and Play. The 100ATC2K drive then appears on the [My
Computer] folder.
5. Open the '100ATC2K' folder in the [DCIM] folder to start selecting your
desired video files. Copy the desired video to your PC.
• Folder Composition:
Removable disk
• Internal Memory
• SD Memory Card
DCIM
100ATC2K
AVI_0001
AVI_0002
AVI_0003
X) Playing back video footage on a TV
1. Turn the ATC2K and TV off.
2. Connect your ATC2K to your TV using the AV cable.
3. Turn the TV and ATC2K on.
4. AV will be displayed on the LCD screen.
5. "AV" appears on the ATC2K screen. TV mode is automatically activated
when the AV cable is connected to the ATC2K. Once the cable is
connected, the function keys will be shown on the TV screen. The
function keys include Pause , Stop , Scan Back , Play ,Scan
Forward and Delete One .
6. Press the Menu button to move the highlight cursor along the function
keys.
7. Press the Confirm button when the desired function key is highlighted.
8. To delete one file, select the Delete-One icon and confirm by pressing the
Confirm button .