EasyManua.ls Logo

Oregon Scientific BAR200 - Alarm and Display Features; Alarm Management; Weather Forecast and Temperature Units; Near-Far Function

Oregon Scientific BAR200
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
5
ALARM
To set the alarm:
1. Press and hold
ALARM.
2. Press
/ to set hour / minute.
3. Press
ALARM or MODE to confirm. indicates alarm
is ON.
To toggle alarms ON / OFF:
1. Press
ALARM to display alarm time
2. Press
ALARM again to turn alarm ON / OFF.
To silence the alarms:
Press SNOOZE to silence it for 8 minutes
OR
Press any other key to turn the alarm off and activate it
again after 24 hours.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius (US- with a 75%
accuracy).
Sunny Partially Cloudy Rainy
Cloudy
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F.
NEAR-FAR FUNCTION
To enable Near-Far function:
Slide SCROLL / MANUAL / SENSOR to SENSOR position
to automatically change it’s display to reveal the indoor /
outdoor temperature when you approach within 2 feet of the
clock as shown below.
To disable Near-Far function:
Slide SCROLL / MANUAL / SENSOR to MANUAL position
to only show the display it is currently on.
Alternatively, slide to
SCROLL to scroll through both
displays.
NOTE When the radio-controlled clock is receiving data,
the Near-Far function will be disabled to prevent interrupting
the clock signal.
P/N: 086L004956-010 REV1
6/60

Table of Contents

Related product manuals