Oregon Scientific BAR218HG - Rear View; Remote Sensor (THGN132 N); Getting Started; Insert Batteries

4
EN
MD/DM/Yr: Calendar / clock with weekday (hour :
minute with second display)
1
4. Indoor humidity reading (current / MAX / MIN) with
humidity trend
1
5. Moon phase display
1
6.
: Outdoor humidity (current /MAX/MIN) with
humidity trend
1
7.
Outdoor temperature reading (current/
MAX
/
MIN
) with
temperature trend
REAR VIEW
1. °C / °F: Select temperature unit
2. RESET: Reset the unit to default settings
3.
Battery compartment
REMOTE SENSOR (THGN132N)
1
2
3
4
5
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5.
CHANNEL switch
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (+/-).
3.
Press RESET after each battery change.