Oregon Scientific EMR812A - User Manual

1
GB
MULTI-CHANNEL IN-OUT
CABLE FREE THERMOMETER
MODEL: EMR812
USER’S MANUAL
INTRODUCTION
Congratulations on your purchase of the EMR812 Multi-Channel
In-Out Thermometer with 433MHz cable free sensor.
The EMR812 is an easy-to-use, state-of-the-art thermometer. The
basic package comes with a main unit, which is the temperature
station, and a remote unit, the thermo sensor.
The main unit has extra-large read-outs for indoors temperature
and for that collected and transmitted by the remote unit. The main
unit can support up to three remote units.
The main unit is capable of monitoring temperature changes of
remote sites. By setting the upper and lower temperature limits the
alarm will activate when those limits are exceeded. Also, the maxi-
mum and minimum temperature of different sites can also be
retrieved quickly.
No wire installation is required between the main and remote units.
As the EMR812 operates at 433MHz, it can be used in the U.S. and
most places in Continental Europe.
MAIN FEATURES: MAIN UNIT
HI ON/OFF
RESET
TEMP AL
°C
°FLO
CHANNEL MEM
CLEAR
433 MHz CABLE FREE

Oregon Scientific EMR812A Specifications

General

Indoor Thermometer	Yes
Outdoor Thermometer	Yes
Temperature measuring range (outdoor)	-20°C to 60°C
Temperature trend display	Yes
Humidity trend display	Yes
Weather forecast	Yes
Clock function	Yes
Alarm function	Yes
Calendar	Yes
Display type	LCD
Power Source	Battery

Summary

Multi-Channel In-Out Cable Free Thermometer

Main Unit Features Overview

Highlights the main unit's features and provides a labeled diagram of its components.

Remote Sensor Features and Setup

Remote Sensor Features Overview

Highlights the remote sensor's features and provides a labeled diagram.

Before You Begin Operation

Remote Unit Battery and Channel Installation

Device Operation and Usage

Getting Started with the Device

Describes the initial setup and signal reception process for the main unit.

Troubleshooting Signal Issues

Tracking Max;Min Temperatures

Configuring Temperature Alarms

Instructions for setting upper/lower temperature limits and enabling/disabling alarms.

Technical Information and Support

The Reset Button Function

Product Precautions

Important safety and handling guidelines to ensure product longevity and user safety.

Product Specifications

Detailed technical specifications for temperature measurement and unit capabilities.

FCC Compliance Notes

Customer Assistance Information

Product Warranty Details