Oregon Scientific EW92 - Sensor Unit and Signal Reception

EN
4
15.BATTERY DOOR
LCD DISPLAY
1. Sensor signal
2. Channel
3. Low battery indicator
4. Min. & Max. temperature
5. Time
6. Signal reception indicator
7. °C & °F
8. Outdoor temperature
9. Indoor temperature
SENSOR
1.LED indicator:
• Flashes when the remote unit transmits a
reading.
2.Wall-mounting holder:
• Supports the sensor on the wall.
3.RESET key:
• Press it to restart the sensor and return all
values to default values.
4.CHANNEL slide switch:
• Assign the sensor to channel 1, 2 or 3.
5.BATTERY COMPARTMENT:
• Accommodates 2 AAA size batteries.
6.BATTERY DOOR
RECEPTION OF SENSOR SIGNAL
OPERATING THE MAIN UNIT
1. Remove the battery door and slide “UK/EU”
switch to select the desired country version.
2. Insert 2 new AA size batteries as per the polarity
information marked on the battery compartment.
3. Press “RESET” key to restart the clock.
1
4
6
3
2
9
8
5
7
1
2
3
4
5
6