EasyManua.ls Logo

Oregon Scientific PE829A - Talk Function (Available in PE829; PE829 A Only); Backlight; LED Light; Keypad Lock; Reset; Batteries

Oregon Scientific PE829A
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
EN
4. Press CH to store. Repeat the whole process to store
another channel.
To change the volume level, press
.
To listen to a stored channel, press CH.
Prolonged use of the FM Radio will significantly
reduce battery life.
TALK FUNCTION (AVAILABLE IN PE829 /
PE829A ONLY)
The talk function is available for DAILY / TARGET / TIMER
/ MEMORY and CLOCK modes. It will broadcast
information related to the current LCD screen, for example
on Daily Mode you will hear: “Today, you have walked
XXXXX steps, XX.XX kilometers/miles and burned
XXXX.X calories.
Broadcasts can be announced automatically at pre-
defined intervals (as detailed in the setting sequence
below), or manually by pressing TALK.
appears when the talk function is broadcasting.
To set up the talk function:
1. Press and hold TALK to enter setting mode.
2. Press
/ to change a setting and press TALK to
confirm and move on to the next one.
3. The setting sequence is:
Auto-talk ON / OFF. If ON is selected you will need to
set the broadcast interval time to 5, 10 or 15 mins.
appears on the screen when this function is activated.
Pacer ON / OFF. If ON is selected you will need to set
the pacer frequency which ranges from 45 to 180
beeps per minute. This function helps you maintain
the pace of your walk / run, as each beep represents
one step.
Languages available – English, French and Spanish
OR English, Italian and German.
The radio function will be paused when the auto-talk
broadcast is happening or when you press TALK.
BACKLIGHT / LED LIGHT / KEYPAD LOCK /
RESET
To turn the backlight ON for 3 seconds, press .
To turn the LED light ON, press
. When you release the
button the light will turn OFF (PE828 only).
To turn the keypad lock ON / OFF, press and hold
.
To reset the unit, remove and then re-insert the batteries.
BATTERIES
appears when the battery is low and needs replacing.
Protect the environment by taking exhausted
batteries to authorized disposal stations.
PE82X_M_EN_N_R0.p65 2008.2.19, 1:09 PM12
P/N: 086L003991-079 REV1
Page 13 of 126

Table of Contents

Related product manuals