14
EN
Save lap Press LAP while the stopwatch
(lap function can is running
only be used in
stopwatch mode) NOTE The stopwatch and lap times
are stored in the same memory. The
memory has capacity for 99 readings
or 99 hrs, 59 mins
View total time / 1. Stop timer / stopwatch. Press
lap memory SET to view memory record
2. Press + or - to scroll through
memory records
3. The latest memory will show
as “M 1”
4. Press SET to view total time
OR
5. Press + or - to view lap time (at
least 1 lap must have been taken)
Delete 1 memory
1. Stop timer / stopwatch
record or all 2. Press SET to view memory record
records 3.
The latest memory will show as “M 1”
4. If you are in timer 1 (user-
selectable countdown timer)
setting, use + or - to enter the
values you require. If you want to
use the stopwatch function,
simply change all values to zero.
Once you have set the timer you wish to use, you can
perform the following functions:
TIMER 1, 2, 3 / INSTRUCTION
STOPWATCH
Start / stop Press ST / SP
Pause / resume Press ST / SP
Edit time while Press + or - to make the timer
timer is running increase or / decrease to
the nearest minute
Reset timer / Stop timer / stopwatch. Press and
stopwatch hold SET
RA202/282_EN 1/27/05, 4:55 PM14
To Next Page
Loading...