Oregon Scientific Weather@Home BAR218HG - Measurement Unit Selection; Altitude Setting; View Current Readings

EN
9
• Wind speed (not available in BAR218HG)
• Altitude
• Show Unavailable Sensor
• Automatically Sync Time
• Show Sea Level Pressure
To select the measurement unit:
1. Tap
to view the measurement unit options.
2. Tap on your desired unit.
3. Tap
to go back to the previous screen.
To set altitude:
The altitude reects the distance from sea level at
your position.
1. Fill in the altitude of your main unit in the blank.
2. Tap
Done.
VIEW CURRENT READINGS
You can directly view all the weather readings
from different sensors through the application at
a time. The readings are in HOME screen.
NOTE
If low battery icon displays on
the screen, please replace the batteries for the
corresponding device.