14
BACKLIGHT
Press LIGHT to illuminate the backlight for 8 seconds.
Press and hold LIGHT to turn the sidelights ON / OFF.
RESET SYSTEM
Press RESET (in the battery compartment) to return
the unit to the default settings.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here
are a few precautions:
• Placement of this product on wood surfaces with
certain types of finishes, such as clear varnish,
may result in damage to the finish. Consult the
furniture manufacturer’s care instructions
for direction as to the types of objects that may
safely be placed on the wood surface.
Oregon Scientific shall not be responsible for
any damage to wood surfaces from contact with
this product.
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
NOTE The technical specification of this product
and contents of this user guide are subject to
change without notice. Images not drawn to scale.
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result
in malfunction, shorter electronic life span,
damaged battery and distorted parts.
• Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty on the unit
and may cause unnecessary damage. The unit
contains no user-serviceable parts.
• Only use fresh batteries as specified in the
user’s instructions. Do not mix new and old batteries.
• Due to printing limitations, the displays shown in
this manual may differ from the actual display.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
To Next Page
Loading...
