- 2 -
BACK VIEW
1
2
3
456
1. Speaker
2. DC input jack
3. 3.5 mm line-in jack
4. AA battery compartment
5. RESET: Press to reset the sleeping box to default
6. CR2032 battery compartment
SIDE VIEW
• + CONFIRM - scroll wheel
• Scroll up/down to adjust sound volume, adjust settings, or
snooze the alarm when the alarm is on
• Press to conrm settings, or snooze the alarm when the
alarm is on
TOP VIEW
1. Sleep timer
• Press to turn on/off the sleep timer
• Press and hold for 2 seconds when the backlight is on,
or while playing a sleeping sound to enter sleep timer
setting mode
2.
Alarm
• Press to turn on/off the alarm
• Press and hold for 2 second to enter alarm setting mode
3. Sleep Enhance
• Press when the sleeping sound is on to turn on/off Sleep
Enhance feature
4.
Sound
• Press to turn on/off the sound
• Press and hold for 2 second to enter sound setting mode
5.
Lighting
• Press to turn on/off the mood light
• Press and hold for 2 second to enter lighting setting mode
LCD DISPLAY
1
2
345
6
1. Alarm is set to on / the device is in alarm setting mode
2.
Sleep timer is on / the device is in sleep timer setting mode
3.
the device is in volume setting mode / Flashes when
the Sleep Enhancement feature is on
4.
Sound is on / the device is in sound setting mode
5.
Mood-light is on
6.
Device low battery display
INSTALLATION
The sleeping box can be powered by batteries or AC adaptor.
USING BATTERIES
1. Slide to open the battery cover.
2. Insert 4 AA batteries into the battery compartment,
matching the polarity.
3. Close the battery cover.
NOTE For continuous use, please install the AC adaptor.
USING AC POWER
NOTE Make sure the adaptor is not obstructed and is easily
accessible to the unit.
To Next Page
Loading...
Need help?
General
