Oregon 510A User Manual

www.oregonchain.com
Bench Chain Grinder
510A
EN 1 FR 6 ES 11
Bench chain grinder Meuleuse électrique pour chaînes de scie à moteur Aladora eléctrica para cadenas de motosierra
OWNER’S MANUAL MANUEL D’UTILISATION ET ENTRETIEN MANUAL DE INSTRUCCIONES
Attention: do not use the grinder before you have
read the owner’s manual in full
Attention : ne pas utiliser l’appareil sans avoir
préalablement lu le manuel d’utilisation et entretien
Atención: no utilice la unidad sin haber leído el
manual de instrucciones
!
120 V~ 60 Hz
P00801078_R03_510A_U&M_OR_120V.indd 1 12/06/2009 10.45.40

Oregon 510A Specifications

General

Brand	Oregon
Model	510A
Category	Grinder
Language	English

Summary

Safety Rules

Technical Data

Safety Devices

Shield Guards

Guards that protect the operator from grinding wheel parts during sharpening.

Safety Switch Function

Machine features a safety switch with a release coil for power failures.

Intended Use

Grinding Wheel Testing

Installation

Installation Height Recommendation

Recommends installing the machine at a height of 1.2-1.3 meters from the floor.

Bench Mounting

Instructions for securing the base unit and fitting the arm for bench mounting.

Wall Mounting

Instructions for securing the base unit and fitting the arm for wall mounting.

Operating Handle Installation

Steps to secure the operating handle to the arm.

Shield Guards Installation

Chain Information

Chain Identification

Instrumental Measurements (Fig.13)

Grinding Wheel Warnings

Correct Grinding Wheel Usage

Emphasizes using the correct grinding wheel and avoiding alterations to the hub.

Grinding Wheel Fitting Precautions

Instructions for fitting wheels, hubs, and flanges correctly to prevent breakage.

Fitting the Grinding Wheel

Grinding Wheel Installation Steps

Checking Grinding Wheel Assembly

Wobble and Vibration Check

Electrical Connection

Power Supply Compliance

Mains Connection Requirements

Start-Up

Checking Grinding Wheel Shape

Grinding Wheel Dressing

Grinding Wheel Dressing Procedure

Adjusting the Vise

Chain Positioning in Vise

Vise Rotation Adjustment

Arm Angle Adjustment

Chain Blocking Unit Adjustment

Cutter Positioning for Grinding

Adjusting the Grinder

Sharpening Angles Setup

Top Sharpening Angle Setting

Cutting Angle Setting

Chain Blocking Unit Setup

Cutter Positioning for Skimming

Sharpening Warnings

Personal Protection During Sharpening

Reminder to wear personal protection equipment when sharpening.

Adjustments with Motor Off

All adjustments must be made with the motor switched off and wheel stopped.

Chain Cleaning and Preparation

Instructions for cleaning the chain and avoiding excessive loading or overheating.

Shutting Down and Maintenance

Trouble Shooting

Machine Fails to Start

Probable causes and solutions for the machine not starting.

Machine Vibrates Abnormally

Probable causes and solutions for abnormal vibration during operation.