Why is my Oregon PS600 Pole Saw bar and chain excessively hot and/or smoking?
The bar and chain may become excessively hot and/or start smoking if the chain is not getting enough lubrication. To fix this, check the oil level and refill the oil tank if it's low.
How to fix an Oregon Pole Saw that does not cut properly?
If your Oregon Pole Saw isn't cutting properly, several issues could be the cause. Here's what to check: * Insufficient chain tension: Tension the chain. * Dull chain: Sharpen the saw chain. * Chain installed backwards: Ensure the chain is installed correctly with the teeth facing the right direction. * Worn chain: Replace the chain. * Dry or excessively stretched chain: Check and refill the oil level if necessary. * Chain not in bar groove: Reseat the chain onto the groove.
What to do if my Oregon Pole Saw chain is not in bar groove?
If your Oregon Pole Saw chain is not seated in the bar groove, the saw will not cut properly. Reseat the chain onto the groove to resolve this issue.
Explains the meaning of warning, caution, and important symbols.
General safety precautions for operating power tools.
Advisories on staying alert and using personal protective equipment.
Specific safety precautions for operating the pole saw attachment.
Explains the general hazard safety alert symbol and its meaning.
Specifies safety distance for bystanders from the machine.
Warning to maintain distance from overhead electrical lines.
Instruction to wear eye protection when operating the machine.
Instruction to wear hearing protection when operating the machine.
Instruction to wear a hard hat when using the machine.
Instruction to wear appropriate closed-toe work boots.
Instructions for connecting optional attachments to the powerhead.
General maintenance procedures to ensure tool longevity and safety.
To Next Page
General
