5. ADJUSTING THE DAMPERS
The Oreka O5 uses ERGODYNAMIC technology to make the user experience as real and as natural as
possible. Thanks to this, you can enjoy hours of pedalling without straining and simply by adjusting the
muscles you can do a sprint/series of more than 1000 watts without the Trainer going anywhere.
The muscles are designed to be used within a range of 2-6 bars of pressure, with the minimum pressure achieving
the pedalling and movement similar to that of climbing a mountain pass, and with the maximum pressure a greater
tightness to perform more intense sprints or series. These muscles are interconnected with the central chamber.
This chamber is where the pressure is adjusted using the Schrader valve.
It is recommended to take 3 bars of pressure as a base. Once you are familiarised with that pressure and the feeling
it transmits, adjust 1 bar at a time until you find a balance that agrees with the feelings or demands of the training
to be carried out.
To Next Page
Loading...