Why does my ORFELD Vacuum Cleaner have weak suction?
Weak suction in your ORFELD Vacuum Cleaner may be due to a dust cup or filter blocked with dust. Remove the dust from the bin or filter. Alternatively, the rolling brush might be jammed with hair or long straps. Clear any hair or straps from the roller brush.
What to do if the red light is flashing on my ORFELD CX11 Vacuum Cleaner while using it?
If the red light flashes on your ORFELD Vacuum Cleaner during use, it indicates a blockage in the main suction inlet or brush inlet. Clear any obstructions from these areas.
How to fix ORFELD CX11 when the main device is not working?
If your ORFELD Vacuum Cleaner's main device isn't working, it could be due to low battery power. Charge the unit before use. Another possibility is a blocked suction inlet. Remove any blockage to resolve this.
What does it mean if the red light is flashing on my ORFELD CX11 when charging?
If the red light flashes while your ORFELD Vacuum Cleaner is charging, the battery is likely damaged and needs to be replaced.
What to do if thermal protection is activated on my ORFELD Vacuum Cleaner?
If the thermal protection is activated on your ORFELD Vacuum Cleaner: 1. Shut off the cleaner. 2. Empty the dust cup. 3. Check the nozzle connection, dust cup inlet, and filter for blockages; remove any if found. After doing this, let the cleaner sit for 30 minutes to cool down. The thermal protection should reset, allowing you to resume cleaning.
General| Brand | ORFELD |
|---|---|
| Model | CX11 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
