To use the WRC001 Wireless Camera on your
Android powered smart device, scan the below QR
code, or search: safetycam
Scan here to download App from
Google Play store
Instructions for using the safetycam App:
Choose SONIX device and press confirm.
A full recharge will take approximately 4.5 hours.
To charge the camera, connect the supplied charging
cable to a suitable 5V Power Adaptor. When connected
and charging, a RED LED will illuminate to show charge
in process.
NOTE: If connection between the wireless camera and
the smart device has been successful, you will now
see the camera feed on screen.
1) Once the installation of the app has
occured, open the application on the
smart device.
2) The ON/OFF Button on the camera
can now be pressed to turn the
device on.
3) Once powered on, the blue light on
the front of the camera will illuminate.
Once you have seen the blue light,
and the App is open on your smart
device, the screen on the right will
appear on first use:
Android Platform Instructions Android Platform Instructions
Icons displayed in the App KEY
Wi-Fi set up
Flip image right and left
Click here to take a picture
Saved images
Turn on/ off grid distance lines
To Next Page
Loading...