29
wip ing the lens with cotton stick (hav ing be en dipped in
alcohol), move it in one direction instead of back and
forth.
(7) Keep the LCD screen away from the sun and high heat
source s .
(8) Turn off the power switch before power cable is
connected.
(9) The period between two consecutive power-on operations
should be longer than 30 seconds.
8.3
8.3
8.3
8.3 Transportation
Transportation
Transportation
Transportation and
and
and
and Storage
Storage
Storage
Storage
(1) Always use the carrying case of the fusion splicer to
prevent moisture , vibration and impact when storing and
transporting the splicer.
(2) Never store the splicer in a place where the humidity or
temperature cannot meet requirements.
To Next Page
Loading...