Seasons Outdoor Collection™
5. Run the wire through the trench from your amplifier to the speaker locations.
Do not connect the wires to the amplifier at this time.
6. Connect the speaker wires you ran from your amplifier to the wires that came attached
to the speakers. It is recommended using wire nuts/silicone burial connectors
to secure and seal the wires (see diagram below).
7. Aer you have made the above connections, connect the wires to your amplifier,
and plug the AC power cord in to the amplifier.
Important:
Ensure to connect the Speaker positive (+) to Amplifier positive (+) and Speaker Negative
(–) to Amplifier Negative (–). If the negative and positive wires are switched, speaker
performance will be drastically impacted.
We recommend testing the system at this time to ensure the speakers are correctly installed
and working properly.
6
To Next Page
Loading...
Need help?
General
