HOW IS THE REVIVALDRIVE COMPACT’S TONE? TURN THE ADJ CONTROL...
TOO BRIGHT OR THIN CLOCKWISE
TOO DARK OR WOOLLY COUNTERCLOCKWISE
JUST RIGHT! LEAVE IN THIS POSITION AND ENJOY USING THE PEDAL!
AMPLIFIER OR CONNECTED DEVICE POST-DRIVE EQ SWITCH POSITION
POWER AMP & GUITAR SPEAKER
MIXING DESK & CABINET SIMULATION
RECORDING INTERFACE & CABINET SIMULATION
P/AMP
BRIGHT, MID-SCOOPED GUITAR AMPLIFIER EQ1
DARK OR MID-RICH GUITAR AMPLIFIER EQ2
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
Step 1: Set POST-DRIVE EQ switch for the connected amp or device
Step 2: Fine-tune the POST-DRIVE EQ with the ADJ control*
Use the tables below to help you set up the RevivalDRIVE Compact for the first time with a new guitar amplifier or flat-response
device. Working through Steps 1 and 2 allows you to “set-and-forget” the POST-DRIVE EQ controls and move on to having fun
dialling in your ideal drive tone with the main controls.
To Next Page
Loading...
Need help?
General
