Need help?Do you have a question about the Origin Effects RevivalDRIVE and is the answer not in the manual?
General| Bypass | True Bypass |
|---|---|
| Technology | Analog |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Source | 9V DC power supply (not included) |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Type | Overdrive |
| Controls | Output, Blend, Highs, Lows, More/Pres, Gain |
| Channels | Mono |
Explanation of the internal circuitry and analog signal path of the RevivalDRIVE.
Detailed features that emulate classic valve amplifier characteristics.
Highlights the pedal's versatility and wide range of tonal shaping capabilities.
Discusses the function and effect of bright cap circuits in vintage amplifiers.
Details the BRI-CAP CUT filter for compensating bright cap effects.
Explores how low-frequency distortion affects tone and note recovery.
Explains the role of negative feedback in amplifier tone and feel.
Describes "ghost tones" and how the GHOST control affects them.
Compares valve and silicon rectifiers and their impact on sag.
Explains the interaction between rectifier choice, sag, and ghost tones.
Provides recommended settings for connecting to different amplifiers.
Explains the function of the footswitches, LEDs, and jewel lamp.
Explains the "VOLUME" control, equivalent to gain, for overdrive level.
Describes the "LOWS" control for adjusting bass response and distortion.
Explains the combined "MORE" and "PRES" control for negative feedback and presence.
Sets the overall output level of the channel.
Controls the mix between dry and overdriven signals.
Adjusts "ghost tones" and sag timing.
Offers three distinct preamp tone-shaping settings.
Explains the "BRIGHT-CAP" switch for high-frequency response.
Adjusts the dry signal level mixed with the overdrive signal.
Assigns the mid boost to specific channels or footswitch.
Sets the level of the mid boost.
Sets the center frequency of the mid boost.
Selects output filters for various amp types.
Treble boost/cut control for high-frequency adjustments.
Compensates for amplifier's bright cap effect.
Selects the shelf frequency for the HI SHELF filter.
Adjusts the low-pass frequency of the BRI-CAP CUT filter.
A combined EQ control with ADJ, FREQ, and MODE settings.
Controls bypass and dry signal path behavior.
Switches the VALVE RECTIFIER channel to a second SILICON RECTIFIER mode.
Toggles between US/UK simulated mains frequencies for ghost tones.
Activates the mid boost via the footswitch.
Footswitch function to override the BLEND control for a 100% O.D. signal.
To Next Page
