5
Using all-analogue components and replacing the valves with discrete transistor-based
circuitry, we have managed to reproduce the sound and circuit behaviour of these classics,
all in a fully variable and controllable way. This means that you can use the
RevivalDRIVE to nail the sound of a particular amp or recording, or you can mix and
match the various properties of different amps to create your dream overdrive sound.
UNIQUE AMP-LIKE FEATURES
•Dual Class-A preamp stages with realistic amp gain-staging – balance headroom with
natural preamp-style clipping.
•Phase inverter and push-pull power amp stages provide realistic tonal response,
symmetrical harmonics, subtle crossover distortion and touch-sensitive drive
characteristics.
•Variable negative feedback in the output stage lets you boost presence, or fine-tune
dynamic response and clean-to-overdrive transitional characteristics.
•Reactive load models the interaction between a real valve output stage and a speaker
cabinet, delivering amp-like feel and realistic harmonics.
•Solid-state (silicon) and valve rectifier channels, plus a simulated mains power
supply, generate realistic “sag” characteristics and “ghost tones”.
THE MOST FLEXIBLE OVERDRIVE EVER MADE
•Wide gain range from clean to fully cranked.
•Preamp and bright cap voicing switches offer a wealth of British and American amp
flavours.
•Lows control lets you tighten up the low end or push the bass into thick distortion.
•Dry blend control lets you mix clean and overdriven signals.
•Variable mid boost for use on either channel or as a footswitchable solo boost.
•Powerful re-amp EQ tailors the sound of the pedal to suit your amp.
To Next Page
Loading...
Need help?
General
