n
If your Energy Monitor
displays “No suitable meter
found” it is most likely out
of range of your meter.
Try moving it closer to
the meter.
If your Energy Monitor
still can not locate
your meter, consult the
Troubleshooting guide
located on page 18.
Tip - Your meter has been programmed to allow
your Energy Monitor to connect to it for up to
two weeks from the date it is dispatched to
you. You should turn it on within this time to
allow it to connect. If your Energy Monitor is not
connected to your meter within this time you
will need to contact Origin Support for further
assistance. Contact details are located on the
back of this booklet.
2. ALLOW YOUR ENERGY
MONITOR TO CONNECT