2. Touch timer control , The minder indicator
will start flashing and “10” will show in the
timer display.
3. Set the time by touching the or control of the
timer
Hint: Touch the “-“ or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+” control of the timer
will decrease or increase by 10 minutes.
4. Touching the “-“ and “+” together, the timer is cancelled, and the “00” will
show in the minute display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
To Next Page