IN 574 08/16
Orion
®
Tritech II-M Stabilized Monopod with 3-Way Pan Head
#40810
Figure 3. Attach the handle to the pan head with the handle
adjustment knob (A). To change the handle angle, just loosen the handle
adjustment knob until the handle can be rotated, then retighten the knob
when the desired angle has been set. (B) Three adjustment knobs let
you rotate and lock the 3-way pan head’s azimuth (horizontal), altitude
(vertical), and lateral tilt (C).
Figure 1. Key features (Shown with retractable mini tripod stand
deployed.)
Figure 2. Fold the mini tripod legs
down (A) until they click into the
locked position. To fold them back
up, (B) press the two spring pegs
inward, then lift the leg up.
Quick-release plate
Handle angle
adjustment
Adjustable
handle
collar
Lateral tilt
adjustment
knob
Handle
angle
adjustment
knob
Handle
Handle
Hand strap
Mini tripod stand
Flip lever leg
locks
Foam grip
Bubble
level
3-way pan head
Altitude
adjustment
knob
Azimuth
adjustment
knob
A
A
B
B
INSTRUCTION MANUAL
CAUTION: While the mini tripod stand can help stabilize
the monopod while in use, it is not designed to support an
unattended camera or spotting scope. Always maintain a
rm grip on your camera or spotting scope with one hand
– even when the mini tripod stand is deployed – to prevent
the monopod from tipping over.
C
Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA
Toll Free USA & Canada: (800) 447-1001
International: +1(831) 763-7000
Customer Support: support@telescope.com
Copyright © 2022 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product instruction or any of its contents
may be reproduced, copied, modied or adapted, without the prior written consent of Orion Telescopes & Binoculars.
AN EMPLOYEE-OWNED COMPANY
To Next Page
Need help?
General
