17
WALK MODE - E12
Parents can help teach kids how the motor feels by using WALK MODE (e12 only).
1. Set gear position to 0 in order to prevent accidental acceleration. The parent can walk
alongside the bike and press and hold (-) MINUS.
2. This will engage the motor for as long as the button is pressed in.
3. It will have a 1-2 sec delay bike will then move at a top speed 2.5mph.
STRIDE MODE
STRIDE MODE allows riders to set the bike in motion using their feet while gripping the
accelerator. Once the wheels have completed 2-3 FULL ROTATIONS, the motor seamlessly takes
control, allowing the rider to shift their feet onto the foot pegs. This mode helps reduce the
feeling of abrupt acceleration, which can catch newer or younger riders o guard. To enable/
disable Stride mode:
1. Turn on bike.
2. HOLD (+/-) simultaneously until P01 shows on the display. (Bike will automatically leave
the program mode after 4 seconds of no use)
3. Press the POWER button until the display shows P09. Press the (-) MINUS button so the
display reads 00000.
4. Wait 4 seconds until the bike exits P MODE, the bike is now in ride mode.
• Stride mode: 00001
• Ride mode: 00000
5. Select the desired gear to operate.
OPERATING BIKE
Left Brake
Power On/O
(+/-) Enter program mode
Walk Mode Indicator
To Next Page
Loading...
