17
Maintenance and Inspection
Cleaning of Filter Element
2. Cleaning of Controller
(Vacuum controller, pressure controller)
If the sheet surface of the controller is very dirty, the
function may deteriorate. Disassemble the
controller periodically, and remove the dirt of each
part.
3. Inspection of Piping
Be sure to tighten the knob nut of filter case surely
and ckeck that there is no air leakage, clogging, or
loosening in the piping.
Inspection period Contents
Once a month
Disassembly
cleaning
Inspection period Contents
Once a month
Air leak, clogging,
looseness of
tightened parts
(Vacuum controller) (Pressure controller)
VC81(KRF70) VC100B(KRF110) PCA8(KRF70) PCA10(KRF110)
Sheet surface
Sheet surface
Sheet surface
Sheet surface
To Next Page
Loading...