81-145 VAC or 162-290 VAC
110/115/120/127 VAC or 208/220/230/240 VAC
Voltage Reg. (Batt.
Mode)
±1.5%(before battery alarm)
Frequency Range
(Batt. Mode)
2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
Typical 2-6 ms, 10ms max.
95% for 110/115/120/127 VAC ; 97% for 208/220/230/240 VAC
93% for 110/115/120/127 VAC ; 95% for 208/220/230/240 VAC
88% for 110/115/120/127 VAC
89% for 208/220/230/240 VAC
90% for 110/115/120/127 VAC
91% for 208/220/230/240 VAC
90% for 110/115/120/127 VAC
92% for 208/220/230/240 VAC
4 hours recover to 90% capacity
Overload, short, discharge, and overcharge protection
Sounding every 10 seconds
Battery Replacement
Alarm
0-90 % RH @ 0- 40°C (non-condensing)
Supports Windows® 2000/2003/XP/Vista/2008, 7/8, Linux, Unix, and MAC
Power management from SNMP manager and web browser
TUV ( UL1778) FCC , Class B Part 15
* Derate capacity to 80% of capacity when the output voltage is adjusted to 208VAC.
**Product specifications are subject to change without further notice.
*** NP800RTX2, NP1100RTX2, NP2500RTX2, and 220V IEC models are non-stock special order.