To Next PageTo Next PageHow to troubleshoot power issues with my Orion Security System DVR/Camera?
If your Orion Security System DVR/Camera isn't powering up, start by checking all cable connections and the power supply. Also, verify that the socket outlet or power point is providing power.
What to do if my Orion Security System camera has no picture?
If your Orion Security System is showing no picture, several factors could be at play. The camera might be out of range; if so, relocate it closer to the DVR, or vice versa. Ensure the camera is properly paired. Also, signal interference can be a factor; try moving the camera and DVR away from sources of interference like sun, rain, radio transmitters, heat, metal, or major obstacles. Finally, check that the camera is receiving power and that all cables are properly connected.
Why is my SD card not detected by my Orion Security System DVR?
If your Orion Security System SD card is not detected by the DVR, it might need formatting. Please refer to “Operation Section 6” for instructions on how to format the SD card.
What to do if my Orion Security System shows a frozen white screen?
If your Orion Security System shows a frozen white screen, try disconnecting the power to the DVR and then reconnecting it.
Why is my Orion Security System DVR not recording scheduled or motion detected events?
If your Orion Security System DVR did not record scheduled or motion detected setting, check the DVR's date and time, and verify the scheduled setting date and time, along with the motion detection setup. Also, ensure that the SD memory card is inserted correctly and is compatible for use.
How to fix poor image quality on my Orion Security System?
If your Orion Security System is showing poor image quality, it could be due to signal interference. Try relocating the camera and DVR away from sources of interference such as sun, rain, radio transmitting devices, heat sources, metal objects, or major obstacles. Also, try moving the camera closer to the DVR, or vice versa, and check the antenna connection.
Why does my Orion Security System screen display white when IR night vision is on?
If the screen on your Orion Security System displays only white when IR night vision is activated, it's likely due to infra-red LED light reflecting off glass or reflective objects. Relocate the camera away from windows, reflective and glass objects, or remove any obstacles causing the reflection.
How to resolve audio interference in my Orion Security System?
If you are experiencing audio interference with your Orion Security System, the camera and DVR might be too close to each other. Given that the camera has a high-sensitivity microphone, keep them at least 5 meters apart. If this isn't possible, reduce the volume or turn on MUTE.
What causes low or unstable signal in my Orion Security System, and how can I fix it?
If you are experiencing a low or unstable signal on your Orion Security System, adjust the antenna connection or relocate the camera closer to the DVR (or vice versa). Signal interference could also be the cause, so try moving the camera and DVR away from sun, rain, radio transmitting devices, heat sources, metal objects, or major obstacles.
What to do if my Orion Security System SD memory card is full?
If your Orion Security System's SD memory card is full, enable the SD memory card overwrite feature. Alternatively, you can reformat the SD memory card or insert a new one.
General| Brand | Orion |
|---|---|
| Model | SC242 |
| Category | Security System |
| Language | English |
Guide to setting up and testing the surveillance system before permanent installation.
How to view live camera feeds, indicators, and signal strength.
Explains different recording options, SD card usage, and storage limits.
Steps to play back recorded videos, navigate, and delete files.
Instructions for pairing additional cameras to the DVR system.
Guidance on formatting and using SD cards for recording.
Technical specifications for the DVR display, wireless input, recording, and camera features.
Details on power, dimensions, operating environment, and connectors.
