Orion TELETEXT 21FVD - Connection to Other Equipment

9
AV1
Input Selection
If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the AV button.
3. To connect the unit to a camcorder
To playback from a camcorder, connect the camcorder to the unit as shown.
Press the AV button to select AV2 to use the TV as a monitor.
If you wish to make a recording from the camcorder, follow the same instructions as recording a TV programme (P.23),
but select AV2 for the channel.
2. To connect the unit to a TV Game
The unit can also be used as a display device for many video games. However, due to the wide variety of different types
of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the
suggested connection diagrams. Press the AV button to select AV2 to use the TV as a monitor. You'll need to consult each
component's Owner's Manual for additional information.
1. To connect the unit to a VCR
Press the AV button to select AV2 to use the TV as a monitor.
Camcorder
Front of unit
Audio/Video cord (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
To Audio/Video OUT
Press the TV/VCR button to select the TV mode and
then press the AV button repeatedly to select AV1 or
AV2.
AV1(Scart socket)
AV2(Front AV input)
TV-program
To Scart socket
of VCR
Scart cable (supplied)
Connection to other equipment
VIDEO IN AUDIO IN (L)
AUDIO IN (R)
4. To connect the unit to another TV set (ie. a widescreen set)
Connect this unit to the other TV set using the SCART connection.
You should select the external input setting on the other TV, e.g. AV/EXT/ etc. (you may need to consult the other
TV's instructions for information on this).
Front of unit
VIDEO IN AUDIO IN (L)
AUDIO IN (R)
Front of unit
VIDEO IN AUDIO IN (L)
AUDIO IN (R)