27
ONE-TOUCH TIMER RECORDING (OTR)
1
Press Sub Power ( ) to turn on the unit.
Then press TV/VCR to select TV/VCR mode.
The One-touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
Load a video cassette with the
erase prevention tab intact.
2
Press SP/LP to select the desired tape speed (SP or
LP). SP or LP will appear on the screen.
3
Press Direct Channel Selec-
tion or CH + or – to select the
channel to be recorded
(Example: Channel 2).
4
NOTES:
• To cancel OTR, press STOP.
• You cannot change the channel while
the unit is recording, but you can switch
to the DVD mode and watch a DVD
without affecting the recording.
5
EXAMPLE:
One-touch Timer Recording for 30 minutes.
Press REC/OTR to begin
recording. Press the button
again to stop recording after 30
minutes. Each additional press
of REC/OTR will increase
recording time as shown below,
up to a maximum of 6 hours.
“OTR” will appear on the screen.
Press REC/OTR to increase the time needed for recording (See
the chart below).
Recording time
NORMAL REC
0:30
1:00
1:30
2:00
Press
once
twice
3 times
4 times
5 times
CH 2
OTR 0 : 30
CH 2
Press
6 times
7 times
8 times
9 times
10 times
Recording time
3:00
4:00
5:00
6:00
NORMAL REC