17
-
-
-
It is recommended that the operator when starng-up, is standing up on the plaorm at the top of the ma-
chine. By doing this, you are having a good overview of danger zones.
Know your machine. Learn all the funcons and actuang mechanisms. You must also know the capacity and
limitaons of the machine. This is to avoid unnecessary downme and in the worst case mechanical brake-
down
-
Use all available protecve and safety equipment. Provide good lighng in the area where the machine is
posioned. All covers must remain intact and aached during operaon. If pressing of ammable materials,
a re exnguisher must be in close proximity.
- -
-
-
-
Hazardous waste, such as rubber, oil and other materials that could harm the environment, must be dis-
posed at approved disposal centres.
-
The operator must be aware of hazards during alignment and assembly of the machine.
- Make a visual check of the complete machine to detect any transport damages.
- Ensure that the machine is standing on a rm, levelled surface.
To Next Page
Loading...