ORKEL MP 2000 - Page 35

35
3.1.4- 
 

-
Bale on table delay To allow the bale to go all the way to the table.

Film revoluons Revoluons of lm laid on the bale on wrapper table

First lm release First opening of the lm cuer

Second lm release Second opening of the lm cuer

Third lm release Third opening of the lm cuer

Film cuer open me Operang me from closed to open.

Film cuer close me The me from starng to close the lm cuer to nish.
-
Net control
Seng of the computer for machines with net only
wrapping unit. (Stops the machine if net is broken or the
roll is empty).

Film control
Seng of the computer for machines with net/lm
wrapping unit. (Stops the machine if lm/net is broken
or the roll is empty).

Net type
Type of the net/lm wrapping unit - for net only (net) or
net/lm model (plasc) 
Measure weight Not in use
Table down delay
Delay of the table from dropping posion unl it starts
to go up again. -
Bale rotaon delay Extra wrap before rotaon starts. (for stabilizing)
-
Bale rotaon me Makes the bale rotate on the table while dropping
-
Rotate feed-rollers Feed-rollers rotate while opening rollers

Bale transport
Gives extra oil to the belt under when moving to the
table 