ORKEL MP 2000 - Page 37

37
-
 
4.1.1 Main secons
 -
4.2.1 Break - in, precauon
4.2.2 PTO
 
4.3.1 Preparaon before transport
4.3.2 Rigging up, aer transport
4.3.3 Levelling the compactor
 
4.4.1 Tractor
4.4.2 PTO speed
4.4.3 Electrical connecon
4.4.4 Hydraulic, connecon
4.4.5 Oil temperature
4.4.6 Funcon control, before starng up
 --
4.5.1 Plasc lm/net binding in chamber
4.5.2 Adjusng the net-brake
4.5.3 Plasc lm, wrapper table
4.5.4 Wrapper, adjusng the knives
4.5.5 Loading/installing a new plasc lm roller
 -
 -
 -
 
4.9.1 Hydraulic valves, operaon and overview
4.9.2 Wrapper, adjustments
4.9.3 Chamber speed adjustments
4.9.4 Conveyor belts, speed adjustments
4.9.5 Plasc lm or net brake. Tension and feeder speed.
4.9.6 Main valves
4.9.7 Chamber pressure, sengs